2026-08-06 BY
IN 公司新闻

⚙️ Product Parameters & Datasheet

  • Part Number: 138607-01AA

  • Product Type: Transient Data Interface (TDI) Module

  • Dimensions: 241.3 mm x 24.4 mm x 241.8 mm (Standard 3500 rack format)

  • Weight: 0.91 kg (2.0 lbs)

  • Country of Origin: USA

  • Power Consumption: 7.0 Watts typical

  • Operating Temperature: -30°C to +65°C (-22°F to +150°F)

  • Storage Temperature: -40°C to +85°C (-40°F to +185°F)

  • Communication Interfaces: Ethernet (100BASE-TX) and Serial (RS232/RS422)

  • Rack Slots Required: Occupies slot 1 (next to the power supplies)

📖 Product Overview

The Bently Nevada 3500/22M Transient Data Interface (TDI) module is a crucial component of the 3500 Machinery Protection System. It combines the functionality of a traditional Communication Gateway with the transient data collection capabilities required for advanced machinery diagnostics. The TDI gathers static and dynamic (transient and waveform) data from the rack’s monitor modules and passes it via Ethernet to host software such as System 1. This continuous data streaming allows operators and reliability engineers to monitor machine health, analyze startup and shutdown transients, and diagnose complex mechanical faults effectively.

🛠️ Operating Instructions

  • Installation: Ensure rack power is turned off before inserting or removing the 3500/22M module. Slide the module into Slot 1 of the 3500 rack and firmly tighten the front panel captive screws.

  • Configuration: Use the 3500 Configuration Software connected via the front USB port or network Ethernet port to set up network parameters, IP addresses, and communication protocols.

  • LED Status Verification: Check the front panel LEDs (such as OK, TX/RX, and CONFIG) after power-up to confirm normal operation and successful communication with other monitor modules in the rack.

  • Firmware Updates: Perform firmware upgrades strictly through the authorized 3500 configuration utility while ensuring a stable power supply to prevent data corruption.

❓ Frequently Asked Questions (Q&A)

  • Q: What is the main function of the 3500/22M module?

    • A: It acts as the interface between the 3500 rack monitoring modules and external software (like System 1), collecting both steady-state and transient vibration data.

  • Q: Can the 3500/22M replace older TDI modules like the 3500/22?

    • A: Yes, the 3500/22M is designed as an enhanced, backward-compatible replacement for legacy TDI modules, offering improved processing speed and expanded data buffering.

  • Q: How do I configure the network settings on the TDI module?

    • A: Network settings are configured using the 3500 Rack Configuration Software by connecting a PC to the front-panel USB port or through the rear Ethernet connection.

🔌 Recommended Alternative Bently Nevada Models

  • 3500/40M: 128229-01 (Mv/Proxp/Velomitor Monitor Module)

  • 3500/42M: 176449-01 (Proximitor/Seismic Monitor Module)

  • 3500/45: 139175-01 (Position/Process Monitor Module)

  • 3500/15: 106M1079-01 (AC/DC Power Supply Module)

  • 3500/05: 149369-01 (System Rack, 19-inch rack frame)

  • 3500/20: 138607-01 (Standard Interface Module – Legacy)

  • 3500/32M: 149986-01 (4-Channel Relay Module)

  • 3500/53: 133819-01 (Trip/Reset Module)

  • 3500/60: 163179-01 (Temperature Monitor Module)

  • 3500/64M: 181582-01 (16-Channel High-Density Temperature Monitor Module)